How to make your own cell full explanation in English and Hindi
- Get link
- X
- Other Apps
Make your own cell
Collect to injection bottle cut to 5 cm long beats of the copper wire use sand paper to scrap about 1 cm of the coating from both end of the wire
Brake open a exhausted dry cell and remove its outer metal covering (made of zinc) cut two 2 mm-wide and 5 cm long steps from the zinc plates insert the copper wire and zinc strips into the rubber cabs of the injection bottle at sold in the figure 5
Now take a wire and connect the copper wire of the bottle with the zinc plate of the other bottle filled both bottles with dilute sulphuric acid of the bottles carefully with the caps in which the copper wires and steps are inserted yourself is ready
How do you taste it?
Take an LED attached to buyers to its two terminals touch the wires from one terminal of the zinc plate and the wires from the other terminal to the copper wire did the LED light up ?
If not change the connection of vice verse did the LED glow? Repeat the above activity using lemon juice and potato juice one by one instant all sulphuric acid to make yourself after a few seconds of immersion of zinc and copper wires introduced sulfuric acid zinc slowly begin to dissolve the in the sulphuric acid we can see bubbles forming on the copper rod the current is passed a form copper rod to zinc road is roads are known as electrodes and dilute sulphuric acid is known as electrolyte hence the chemical energy is converted into electric energy by electrosis method now your cell is ready
Thank you
Kartik Kumar sandel
From Hyderabad
From the city group of school
Bholaram Secunderabad
Over Kartik Kumar shandilover
- Get link
- X
- Other Apps
Comments